Performing home renovations and remodels are quite common as Americans spend hundreds of billions of dollars on them annually. Renovations come in all shapes and sizes, from small paint jobs to completely remodeling a kitchen.
However, when renovating your home, it is a good idea to think about increasing the value of your home. This will help you eventually fetch a higher price when it comes time to sell the home. There are several different renovations that can help increase the value of your home. One of the best and most common is a bathroom renovation.
In particular, the sink and vanity are of particular importance. These are where most people will spend a lot of time, and where many eyes are drawn to when entering a bathroom. With that in mind, this article is going to go over a few things to look out for when installing bathroom vanities.
That You Measure Correctly
Arguably the most important part of installing sinks and bathroom vanities Los Angeles takes place before any work is actually done. That, of course, is measuring. In addition to measuring wall size to make sure the vanity will fit, you also need to ensure your plumbing will fit the sink.
Without measuring multiple times in advance, you may end up ordering and receiving a vanity that simply won’t fit within your space. When measuring, you should take into account the width of the vanity, the height that the sink or countertop reaches and even how far out the vanity cabinet can go.
That the Plumbing is Attached and Working Correctly
A bathroom vanity may look nice, but it needs to be functional as well. While everything might look in order, it’s a good idea to test the sink as well. The water should flow well and consistently, and should have decent pressure. Be sure to check for any leak as well, and tape or repair it as quickly as possible.
Also, don’t forget to check the drains. Once you’re done installing the plumbing, open your valves back up slowly to make sure water is draining correctly. If there are leaks here, consider tightening up the valves. If you don’t check everything from top to bottom, a small leak or other issue could lead to a much bigger problem later down the road.
That it is Attached to the Wall and Secure
Sometimes, people are so concerned about making sure the plumbing is right that they forget to secure the actual cabinet or vanity. The vanity should be attached to the wall with drywall screws or even wall anchors. Make sure it is level, secure and there is no space. If there is space or gaps, consider using moulding to fill it if you don’t want to reposition the whole vanity.
Also, you need to make sure that the countertop is secured. If it is loose or not enough caulk was used, it could spell trouble. The last thing you want is for someone leaning on the countertop to have it tip over and become damaged or destroy the flooring.
If the plumbing and the vanity have both been securely attached, are functional, with no leaks present, your job is essentially done and your bathroom vanity should be ready for regular usage. Of course, check on it frequently over the next few days to make sure no leaks or other issues have arisen.
In conclusion, the information within this article will help you learn what to look out for when installing bathroom vanities. It can be a good amount of work, but if you know what to look for, it should go off without a hitch.